Aluminum stucco sheets serve as an innovative and versatile solution for numerous applications, primarily focused on aesthetics and functionality.
Features
- Textured Surface: The unique embossed texture not only enhances aesthetic appeal but also provides a slip-resistant surface.
- Lightweight: Aluminum's low-density characteristics contribute to overall material sustainability and ease of handling.
- Corrosion Resistance: Naturally resistant to rust and deterioration, aluminum stucco sheets are reliable for both indoor and outdoor applications.
- Customizable Thickness: Available in various thicknesses, these sheets can be tailored to specific application needs.
- Insulation Properties: The embossed surface aids in thermal efficiency, providing better insulation than flat sheets.
- Cost-Effective: A competitive option as compared to other materials with similar performance characteristics.
Applications
Aluminum stucco sheets find applications in various industries, including but not limited to:
- Building and Construction: Used for exterior wall cladding, roofing, and building fascia.
- Refrigeration and HVAC: Commonly referred to in manufacturing insulation panels due to their thermal building properties.
- Manufacturing: Utilized in creating trailers, truck bodies, and equipment housings.
- Architectural Finishes: Applied for decorative features in residential and commercial buildings.
Technical Specifications
Here are the detailed technical specifications for aluminum stucco sheets:
| Specification | Description |
|---|---|
| Material | Aluminum Alloy |
| Alloy Series | 3003, 5052 |
| Temper | H14, H16, H18 |
| Thickness | 0.025" to 0.125" (0.64 mm to 3.17 mm) |
| Standard Width | 48", 54", 60" (1219 mm to 1524 mm) |
| Length | Custom length according to requirement |
| Weight | Approximately 0.8 - 1.4 lb/ft² |
| Melting Point | ~1218°F (660°C) |
| Surface Finish | Stucco Embossed (Commercial Grade) |
Chemical Composition
Here is a breakdown of chemical compositions commonly found in aluminum stucco sheets:
| Alloy | Si (%) | Fe (%) | Cu (%) | Mn (%) | Mg (%) | Zn (%) | Ti (%) | Others (%) |
|---|---|---|---|---|---|---|---|---|
| 3003 | 0.12 | 0.70 | 0.20 | 1.00 | 0.90 | 0.10 | 0.05 | Bal. <0.15 |
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.20 | 0.10 | 0.15 | Bal. <0.10 |
Performance Characteristics
| Property | Value |
|---|---|
| Tensile Strength | 215 MPa (31,175 psi) |
| Yield Strength | 145 MPa (21,000 psi) |
| Elongation | 10%-25% (depending on alloy/temper type) |
| Hardness | 60-80 HB |
| Brinnell Hardness | 75-105 |
