Aluminium Alloy 6063

6063 Aluminum Sheet

6063 aluminum alloy is Al-Mg-Si alloy， with excellent processing performance， excellent solderability， extrusion and plating， good corrosion resistance， toughness， easy polishing， anodizing Excellent effect， is a typical extruded alloy.

• Alloy6063
• TemperO / T1 / T4 / T5 / T6
• Thickness0.3-600mm

6000 series Aluminum Plate

The representative series of this series aluminum plate is 6061 series. The main ingredient of this series aluminum plate includes magnesium and silicium elements. As a result, it has the features of both 4000 series and 5000 series.

• Alloy6063, 6061, 6262, 6060, 6463
• TemperO-H112
• Thickness0.5-8mm

6063 Aluminium Sheets Rapid Extrusion of New Technology

6063 aluminium sheets is widely used in extrusion construction profiles and industrial profiles and is a very good deformation of aluminum alloy. At present, China’s aluminum alloy hot deformation extrusion process has gradually approached mature, but com

The difference between 6060 aluminum alloy and 6063 aluminum alloy

​The chemical composition and processing performance of 6060 and 6063 aluminum alloys are similar, but they are not exactly the same. The difference between the two lies in the strength.

6061 6063 6060 marine grade aluminum plate

6061 marine grade aluminum plate have excellent processing properties, weldability and plating properties.6063 aluminum alloy is a medium strength heat treatable strengthening alloy, magnesium and silicon are its main alloying elements.

Difference Between the 6061 and 7075 Aluminum Plate

6061 and 6063 belong to 6 department they are aluminum magnesium (+) silicon aluminum alloy and 7075 mainly based on aluminum zinc alloy element. The first in the basic ingredients to both behind and are quite different

Five Bars Pattern Aluminum Tread Plate

Five bars pattern aluminum tread plate is a typical anti-skid pattern products, suitable for vehicle ships, mechanical platform pedal, workshop and cold storage floor, a variety of platform floor use. Five patterns were parallel distribution, with a certa

4×8 Aluminum Sheet

4 x 8 Aluminum sheet is the standard dimension which widely used in construction. We can produce 4 x 8 Aluminum sheet with alloy 1100, 1050,1060,1200, 3003, 3105, 5052, 5083,5005,6061,6063,etc.The thickness range from 0.3mm to 200mm.

Difference Between 7075, 6063 and 6061 Aluminium Sheet Metal

Aluminium sheet metal can be divided into different alloy grades according to the different alloying elements, different alloy grades of aluminum sheet metal has a different range of applications.Today we explain to you guys what is the difference between

Car Aluminium Plate in Aluminum Processing Industry

Overcapacity of domestic aluminum processing industry and aluminium plate processing equipment has been one of the problems in aluminium processing industry. Someone who just attended the twelfth session of the Shanghai copper and aluminium summit said th

High Quality 6063 Aluminium Plate for Rail Transit

The most commonly used on the foreign vehicles, extrusion performance and comprehensive performance better, 6063 aluminium plate belongs to the Al-Mg alloy, is the most widely used a rust-proof aluminium, the use of a wide range of alloys, is the most pro

Material of Aluminum Sheet

Aluminium sheets are divided into cold-rolled and hot-rolled, as well as thin sheets and medium-thick sheets. Aluminium sheets have high plasticity, corrosion resistance, conductivity, and thermal conductivity, but low strength, cannot be strengthened by

Application of Aluminum

Haomei can produce various aluminum semi-finished materials; aluminum application is widely common in our daily life. Here are some aluminum applications in the followings. Household goods, daily necessities containers, lid, handles are mainly made by alu

6082 Ultra-wide Aluminium Plate

Henan is the aluminium plate suppliers gathering place, Henan 6082 thick aluminium plate suppliers are also very many, 6082 aluminium plate is 6 alloy aluminium blank after hot rolling treatment, post-cutting and surface polishing after the formation of t